3.2 Physical Installation

This chapter explains how to install DTR-100DB with your computer or notebook.

1. Connecting USB Port

Connect USB connector of the DTR-100DB to the USB port on your computer or notebook.

2. Connecting Terrestrial Antenna

Connect the supplied ISDB-T antenna to the VHF/UHF port on the backside of the DTR-100DB.

3. Install Device Driver & Utility

(1)After installing the DTR-100DB into your computer or note- book, the system will find a new hardware device as the below figure “Found New Hardware Wizard” will appear. Please click “Cancel” to exit the Wizard.

Page 4