LED

 

 

Description

 

 

 

 

 

Off/Off: Works with 10Mbps

 

 

100 / 1000

 

 

On/Off: Works with 100Mbps

 

 

 

 

 

Off/On: Works with 1000Mbps

 

 

FDX

 

 

Off: Works in Half-Duplex mode

 

 

 

 

On: Works in Full-Duplex mode

 

 

 

 

 

 

 

ACT

 

 

Blink: Transmitting or receiving data through the LAN

 

 

 

 

 

 

 

 

 

 

 

Table 2-1Descriptions of ENW-9607 LEDs

 

 

 

 

 

 

 

 

LED

 

 

Description

 

 

1000

 

 

Off: The connection is not established.

 

 

 

 

On: The connection is not established.

 

 

 

 

 

 

 

FDX

 

 

On: Works in Full-Duplex mode

 

 

 

 

 

 

 

 

ACT

 

 

Blink: Transmitting or receiving data through the LAN

 

 

 

 

 

 

 

 

 

 

 

Table 2-2Descriptions of ENW-9607M LEDs

 

2.2 Hardware Installation

Step 1: Turn off the PC.

Step 2: Remove any metal decorations from your hands and wrists.

Step 3: Remove the cover from your PC.

Step 4: Locate an empty, non-shared bus mastering PCI slot and remove the corresponding back plate. Save the screw for use in Step 6.

Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to ensure it is fully seated in the slot.

Step 6: Secure the adapter with the screw you saved in step 4.

4