Step3: Keep enough ventilation space between the Switch and the surrounding objects.

 

 

When choosing a location, please keep in mind the

 

 

environmental restrictions discussed in Chapter 1, Section

Note

 

4, Specification.

 

 

 

Step4:

Connect your Switch to network devices

A.Connect one end of a standard network cable to the 10/100 RJ-45 ports on the front of the Switch.

B.Connect the other end of the cable to the network devices such as printer servers, workstations or routers…etc.

 

Connection to the Switch requires UTP Category 5 network

 

cabling with RJ-45 tips. For more information, please see

Note

the Cabling Specification in Appendix A.

 

 

Step5: Supply power to the Switch.

A.Connect one end of the power cable to the Switch.

B.Connect the power plug of the power cable to a standard wall outlet then power on the Switch.

When the Switch receives power, the Power LED should remain solid Green.

2.2.2 Rack Mounting

To install the Switch in a 19-inch standard rack, follow the instructions described below.

Step1: Place your Switch on a hard flat surface, with the front panel positioned towards your front side.

11