2. HARDWARE DESCRIPTION

This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same Web Smart Switch and automatically distinguishes the speed of incoming connection.

This section describes the hardware features of Web Smart Switch. For easier management and control of the Web Smart Switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before connecting any network device to the Web Smart Switch, read this chapter carefully.

2.1 Front Panel

The Front Panel of the Web Smart Ethernet Switch consists of 24x Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports, the FGSW-2402VS provide two open slots can be installed by optionally two of 1000Base-T port, 100Base-FX, or 1000Base- SX/LX fiber-optic interfaces. Also the FGSW-2620VSF provides 2 Gigabit TP/SFP combo ports either can be 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface.

The LED Indicators are also located on the front panel of the Web Smart Switch.

Figure 2-1:FGSW-2402VS Switch front panel

 

 

 

Figure 2-2:FGSW-2620VSF Switch front panel

2.1.1 LED indicators

 

System

 

 

 

 

 

 

 

LED

Color

Function

 

PWR

Green

Lights to indicate that the Switch has power.

 

 

 

 

 

Per 10/100Mbps port

 

 

 

 

 

 

LED

Color

Function

 

LNK/ACT

Green

Lights to indicate the link through that port is successfully established.

 

 

 

 

 

100

Orange

Lights to indicate the port is running in 100Mbps speed.

 

 

 

 

Per 10/100/1000Base-T port /SFP interfaces (FGSW-2620VSF only)

LED

Color

Function

 

 

Lit: indicate that the port is operating at 1000Mbps.

LNK/ACT

Green

Off: indicate that the port is operating at 10Mbps or 100Mbps.

1000

 

 

Blink: indicate that the switch is actively sending or receiving data over that port.

 

 

 

 

 

LNK/ACT

 

Lit: indicate that the port is operating at 100Mbps.

Green

Off: indicate that the port is operating at 10Mbps or 1000Mbps.

100

 

 

Blink: indicate that the switch is actively sending or receiving data over that port.

 

 

 

 

 

FDX

Green

Lit: indicate that the port is operating at full-duplex mode.

Off: indicate that the port is operating at half-duplex mode.

 

 

 

 

 

- 7 -