2.2.1 Desktop Installation

To install the Fast Ethernet Switch on desktop, simply follow the next steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the Fast Ethernet Switch.

Step 2: Place the Fast Ethernet Switch on desktop near an AC power source.

Step 3: Keep enough ventilation space between the Fast Ethernet Switch and the surrounding objects.

When choosing a location, please keep in mind the environmental restrictions discussed in Chapter 1,

Note Section 1.4 Product Specifications.

Step 4: Connect your Fast Ethernet Switch to network devices.

A. Connect one end of a standard network cable to the 10/100 RJ-45 ports on the front of the Fast Ethernet Switch.

B.Connect the other end of the cable to the network devices such as printer servers, workstations or routers…etc.

 

Connection to the Fast Ethernet Switch requires UTP

 

Category 5 network cabling with RJ-45 tips. For more

Note

information, please see the Cabling Specification in

Appendix A.

 

Step 5: Supply power to the Fast Ethernet Switch.

A.Connect one end of the power cable to the Fast Ethernet Switch.

B.Connect the power plug of the power cable to a standard wall outlet.

When the Fast Ethernet Switch receives power, the Power LED should remain solid Green.

11