11.Select Printer Configuration.
12.Select Printer 0 (or Printer 1, Printer 2), and press Enter, then select Parallel LPT1 (or LPT2, LPT3) in the Type field. If your print server is with only one port, you do not need to configure this Type field.
13.Press Escape, and answer Yes to the Save Changes question.
14.Select Queues Serviced by Printer, then select Printer 0 (or Printer 1, Printer 2) and press Enter.
15.Press Insert key and add your newly created print queue to the list of queues serviced by the printer. Enter a priority number for the queue service, or press Enter to accept the default.
16.Repeatedly press Escape to exit the PCONSOLE program.
17.After setup the NetWare server. Please write down those settings and refer to section 7.7 to enter the settings of print server.
NOTE: If the print server you have is with multiple printer connectors, you may create multiple print queues and printer objects.
Your print server should now be ready to use. You should be able to redirect printing to your print server using a CAPTURE command such as the one shown in the previous section.
23