This chapter provides quickly setup procedure for four major connection modes:

nSection 3.1: Bridge Mode

nSection 3.2: Routing Mode for PPPoA and PPPoE

nSection 3.3: Routing Mode for IPoA or EoA

nSection 3.4: LAN to LAN Bridge Mode

Please verify your connection mode and check the corresponding section to quickly install your GRT-501 or GRT-504.

3.1 Bridge Mode

Web UI Configuration

Step 1.

Click Basic on the left menu, the BASIC setting screen will display. And then select Bridge and CPE Side to setup Bridge mode of the Router and then click Next for the next setting.

This product can be setup as two G.SHDSL.bis working mode: CO (Central Office) and CPE (Customer Premises Equipment). For connection with DSLAM, the G.SHDSL.bis working mode is CPE.