6. Installing the Switch

This part describes how to install your Gigabit Ethernet Switch and make connections to it. Please read the following topics and perform the procedures in the order being presented.

Note: This Switch does not need software configuration.

Desktop Installation

To install the Switch on desktop, simply follow the next steps:

Step 1: Attach the rubber feet to the recessed areas on the bottom of the Switch.

Step 2: Place the Switch on desktop near an AC power source.

Step 3: Keep enough ventilation space between the Switch and the surrounding objects.

Note: When choosing a location, please keep in mind the environmental restrictions discussed in Product Specifications.

Step 4: Connect your Switch to network devices.

A. Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports on the rear panel of the Switch.

B. Connect the other end of the cable to the network devices such as printer servers, workstations or routers…etc.

Step 5: Supply power to the Switch

A. Connect one end of the power cable to the Switch

B. Connect the 12V DC power adapter to a standard wall outlet

When the Switch receives power, the Power LED should remain solid Green