4.2.Hardware Connection

yPower Input

The DC power input connector is located on the IP Camera's bottom panel, and is labeled 12V DC with a single jack socket to supply power to the IP Camera. Power will be generated when the power supply is connected to a wall outlet.

yEthernet Jack

The IP Camera's bottom panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports “Auto-MDIX” function, allowing the IP Camera to automatically detect or negotiate the transmission speed of the network. For ICA-107P, this port is also the PoE interface.

yAntenna Connector (ICA-107W only)

ICA-107W provides a standard Reverse SMA connector on its top panel. The external antenna allows you to adjust its position to obtain the maximum signal.

yReset Button

1.Press the reset button (for less than 2 seconds) and the IP Camera will reboot.

2.Press the reset button for more than 5 seconds and the IP Camera will reset to the factory default. The factory default settings are listed in the table below.

Power Input

 

Ethernet Jack

 

Reset Button

 

 

 

 

 

 

Bottom View of IP Camera

 

(Example on ICA-107)

 

 

Factory Default Setting

 

IP Address

192.168.0.20

Default Account

Admin

Default Password

Admin

Default Http Port

80

Default Video Port

4321

 

5