2.2 Mounting Installation

This section describes how to install the Industrial Fast Ethernet Switch and make connections to it. Please read the following topics and perform the procedures in the order being presented.

 

 

 

In the installation steps below, this Manual use IGS-

 

 

 

801 (PLANET 8 Port Industrial Gigabit Switch) as the

 

Note

 

example. However, the steps for PLANET Industrial

 

 

Switch & Industrial Media Converter are similar.

 

 

 

 

2.2.1 Install DIN-Rail Mounting

The DIN-Rail is screwed on the Industrial Fast Ethernet Switch when out of factory. When need to replace the wall mount application with DIN-Rail application on Industrial Fast Ethernet Switch , please refer to following figures to screw the DIN-Rail on the Industrial Fast Ethernet Switch. To hang the Industrial Fast Ethernet Switch, follow the below steps:

Step 1: screw the DIN-Rail on the Industrial Fast Ethernet Switch.

19