ØSystem Name: display and change the system name of this Switch

ØSystem Location: display and set the location of this Switch

ØSystem Contact: display and set the administrator of this Switch

ØIP Address: display and set the IP address of MGSW-004

ØSubnet Mask: display and set the Subnet Mask of MGSW-004

ØDefault Gateway: display and set the gateway of MGSW-004

ØChange User/Password: allow to set the User name and password

ØConsole Login Enabled: provide enable or disable Console login MGSW-004,

ØQuit: logout on MGSW-004

3.3.2 Ports Settings

ØSelect any one port, the menu contains ten items for port management will shown up as below:

ØLink (RO): display the link state (UP/DOWN) of per port on MGSW-004

ØSpeed/Duplex (RO): display the Speed/Duplex of the device connect to the port

ØPort Enabled: allow enable or disable the port of MGSW-004

ØSpeed/Duplex: allow set Auto- negotiation, 100Mbps-full/half duplex, 10Mbps-full/half duplex

ØFlow Control: allow enable or disable flow control on each port

ØBack Pressure: allow enable or disable Back Pressure on each port

ØVLAN Tagged: allow enable or disable VLAN Tagged on each port

ØDefault VLAN ID: allow set VLAN ID 1~4095 on each port

ØNote: set and display the information of each port

ØQuit: back to previous menu

8