Figure 3. 100Base- FX module duplex mode setting of web interface

Table 2 below shows the settings for working under 100Mbps full- duplex mode and half-duplex mode. Both module (slide-switch) and the switch (web interface) should be fixed on the same mode.

Speed/duplex

100Full-duplex mode

100Half-duplex mode

 

 

 

Hardware (module)

Full-duplex mode

Half-duplex mode

 

 

 

Software (firmware)

100 Full

100 Half

 

 

 

Table 2. Settings of 100Base-FX module

Table 3 below shows the slide switch operation for full duplex and half duplex mode.

Slide Switch Description

The module works on full duplex mode. The other side must FDX be also configured on full duplex mode. This provides up

to 2km distance by multi-mode module and 15/20km by single-mode module.

The module works on half duplex mode. The other side must HDX be also configured on half duplex mode. This provides up to

412m distances.

Table 3. Slide switch settings of 100Base-FX module

10