Figure 3-14. Port Security page

3.12.1 Setting Up Procedures

Step 1: Select the port that you want to add in the MAC Address

Step 2: Key in the MAC Address in the field provided, e.g. 00-80-40-E8-85-12, and click “Add” button The system will then add in the New MAC Address into the listing on the right side of the screen.

3.12.2 Delete MAC Address

If you want to delete MAC Address(es), simply follow the procedures shown below:

For deleting individual MAC Address

Step 1: Select a MAC Address and clink on "Del ->" button.

The system will prompt you to confirm your action:

Step 2: Choose “OK” button to confirm.

The particular MAC Address will be successfully deleted!

For deleting ALL MAC Addresses

Step 1: Click on "Delete All" button and the system will again prompt you the message as shown as above.

Step 2: Choose "OK" button to confirm.

All MAC Addresses will be deleted immediately!

3.13 Mirror Port

3.13.1 Using Mirror Port to Monitor Traffic

This function allows you to set up a ‘mirror’ port of any specified port(s) or VLAN, such that you can monitor the traffics of the monitored port(s) or VLAN without intervening them. In effect, the traffics on the monitored port(s) VLAN are replicated on the mirror port that you can use a protocol analyzer to analyze the traffic for specific problem.

21