( with smart country

00886 (Taiwan’s country code is 886)

 

code )

2. Pick up the handset and press the

button.

3.Dial ＊area code + telephone number＃

4.To end the call, either press the button or replace the handset on the charger.

Make a PSTN Call

1. Pick up the handset and press the

button.

2.Dial a PSTN phone number.

3.To end the call, either press the button or replace the handset on the charger.

Receiving a Call

1. When a call is coming, press button

to answer it.

2.To end the call, either press the button or replace the handset on the charger.

Using Speaker Phone 1. To turn the speakerphone on, press

and hold the button until the icon

appears on the display.

 

2.To turn the speakerphone off, press and hold the button until the icon disappears on the display.

Muting the

1.

To mute the microphone, press the

button while

icon appears.

Microphone

2.

To turn to the normal mode, press

button once more.

 

Note: In the mute mode, the icon will appear on the display.

Adjusting Voice

1.

Press

or

button to adjust the volume level.

 

Volume

Note: During a call, you can adjust the earpiece volume from level 1 to 9.

Register Handset

1.

Turn on USB or Adapter power (the base will open to register for 1 minutes)

2.Press button to go to HS register, press INT button to enter.

3.Select the desired DECT base (Base1 for example). Press INT key, DCT-100 will display Searching…. on the LCD screen

4.Wait till a machine hardware ID shows up, ex: 002F5-11708H, then press

INT

5.When machine prompts for PIN number, inert PIN number 1590 then press INT, then DCT-100 will start to register to base and showing Searching….

6.Once the registration is completed, the DCT-100 will show HS x, Base y on the screen. (x is the registered handset number and y is the registered DECT base.)

 

 

Note: Registration is available

Clear Registration

1. Power off the DCT-100 handset.

 

 

2.

Press the INT button and R power on button together, and DO NOT release

 

 

 

the buttons till the LCD displays "F->clear Subs"

 

 

3.

Press the

button to clear the handset base settings.

 

 

4.

Wait till "Not Sub" displayed; it is now not registering to any DECT base.

Transfer Call

1.

During handset 1 (HS1) conversation, press the INT button and enter the

 

 

 

 

16