| 2. | System Information | Show detail system information of each |
|
|
| switch including their hardware, software |
|
|
| version, system up time, system contact, |
|
|
| device name, device location and system |
|
|
| management capabilities. |
| 3. | System Configuration | Modify system contact, device name and |
|
|
| device location of each switch on the |
|
|
| stack. |
| 1. | Network Configuration | Configure each switch’s IP address, |
|
|
| subnet mask and default gateway. |
| 2. | Console Port Status | Display the console port configuration, |
|
| Display | like baudrate, databits, parity, etc. |
| 3. | SNMP Community | Create, modify or delete SNMP |
|
| Setup | community name, the IP address |
|
|
| associated with the name and the access |
2. Management |
|
| right. Up to 5 entries are supported. |
4. Trap Receiver Control | Create, modify or delete the community | ||
Setup |
|
| name, IP address and aging time of the |
|
|
| trap receivers. Up to 5 receivers are |
|
|
| supported. |
| 5. Management Features | Enable or disable web, telnet and SNMP | |
|
| Control | management function of the switch. You |
|
|
| can also change the http port number on |
|
|
| this menu. |
| 6. | Trap Filtering Setup | Define which events will trigger the trap |
|
|
| on this menu. |
| 1. | Port | Show the status of each VDSL and |
|
| Status/Configuration | Ethernet ports and configure each ports |
3. Device Control |
|
| settings. It also allows you to check the |
|
| status of connected CPE (VDSL | |
|
|
| |
|
|
| converter), reset the CPE and do |
|
|
| loopback test. |
| 2. | Address Table | Create, delete and display the MAC |
|
|
| address entries of each port. You can |
|
|
| also modify the aging time and search a |
|
|
| specified MAC address on this menu. |
| 3. | VLAN | Two VLAN modes are supported on this |
|
|
| switch, 802.1Q VLAN and port group |
|
|
| VLAN. Please select the VLAN mode |
|
|
| first and then make further configuration. |
|
|
| Please refer to section 4.9 for detail |
|
|
| configuration available on this switch. |
| 4. | Security | This function is reserved for future use. |
| 5. | IGMP Snooping | Enable or disable the IGMP Snooping. |
|
|
| You can also display the IP multicast |
|
|
| registration table on this menu. |
| 6. | Mirror | Enable or disable the mirror function and |
|
|
| choose the sniffer port and monitored |
|
|
| port. |
| 7. | Statistic Information | Show traffic information of each VDSL |
|
|
| and Ethernet ports. |
- 13 -