MAC address for PPPoE dial-up connection.

Please refer to the following operate procedures for more understandings to carry out the MAC Clone function.

1.Please login ATA and browse to “Network -> LAN Settings” page. To switch the LAN mode to NAT mode then press Save&Reboot button to save the settings and reboot machine.

2.Please make sure the network cable of your PC directly connect with PC port of ATA, then re-login ATA. (In the NAT mode, the default IP address of PC port is http://192.168.123.1)

3.Please browse to “Advanced Settings -> MAC Clone Setting” page and enable the MAC Clone function.

4. ATA will prompt if sure want to clone the MAC of your PC to the LAN port of ATA.

42