Planet Technology WGS3-24000, WGS3-24240, WGS3-5220 4. Logon to the Console

4. Logon to the Console

Once the terminal has connected to the device, power on the WGS3 Layer 3 Switch, the terminal will display that it is running testing procedures.

Then, the following message asks the login user name and password. The factory default user name and password as following, and the login screen in figure 4-1 appears.

User name: admin

Password: admin

Figure 4-1WGS3 Layer 3 Switch Console Login screen

1. For security reason, please change and memorize the new password after this first setup.

2.Only accept command in lowercase letter under console

Note interface.

6