WGSD-1022C

8-Port 10/100Mbps + 2-Port Gigabit TP/SFP Combo Managed Switch

Cost-effective Desktop Size / Fiber Capability / Group Managed

Switch

The PLANET WGSD-1022C is a desktop size Layer 2 Managed Fast Ethernet Switch. It provides 8 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP interfaces. The compact-size design Switch not only fits into space-limited environment but also is mountable in a 19-inch rack with attached rack-mounting kits. The equipped Gigabit SFP slot makes the WGSD-1022C with capability of fiber link for distance extending and can handle extremely large amounts of data in a secured topology which is linked to a backbone or high capacity servers.

The various supports of QoS mode and VLAN features make the WGSD-1022C meet the needs of SOHOs, SMBs and enterprises in effective data traffic control such as VoIP, video streaming and multicast applications. The key features are shown as below:

• IP Stacking up to 8 units

• Rapid Spanning Tree

• IGMP Snooping

• 802.1Q VLAN

• SNMP / SNMP Trap

• SFP slots, Fiber link capability

Enhanced Layer 2 Features

The WGSD-1022C can be programmed for enhanced switch management functions, such as per port speed configuration, Port Trunking, VLAN, Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The WGSD-1022C provides Port-based VLAN, 802.1Q Tagged VLAN and the VLAN groups allowed on the WGSD-1022C will be maximally up to 255. Via supporting port trunking, the WGSD-1022C offers the operation of a high-speed trunk combining multiple ports. It also provides four groups of up to 8 ports for trunking and supports fail-over.

Efficient Management – Stacking Management

For efficient management, the WGSD-1022C is equipped with console interface, Web interface and SNMP agent. With its built-in Web-based management, the WGSD-1022C offers an easy-to-use, platform-independent management and configuration facility. It supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSD-1022C can also be accessed via Telnet and the console port.

One of the management features of WGSD-1022C is the IP Stacking function support. It helps network managers to easily configure up to 8 switches in the same series via one single one IP address instead of connecting and setting each unit one by one.

KEY FEATURES

Physical Port

•• 8-Port 10/100Base-TX RJ-45

•• 2-Port Gigabit TP/SFP combo interface

Layer 2 Features

•• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard

•• Auto-negotiation and half duplex/full duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports.

•• High performance of Store–and-Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth

Data Sheet

1