Planet Technology SGSW-24040, WGSW-24040 3. Terminal Setup, START, Programs, Hyper Terminal

3. Terminal Setup

To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the WGSW / SGSW Managed Switch. The console port of the Managed Switch is DCE already, so that you can connect the console port directly through PC without the need of Null Modem.

A terminal program is required to make the software connection to the WGSW / SGSW Managed Switch. Windows’ Hyper Terminal program may be a good choice. The Hyper Terminal can be accessed from the Start menu.

1.Click START, then Programs, Accessories and then Hyper Terminal.

2.When the following screen appears, make sure that the COM port should be configured as:

óBaud: 115200

óParity: None

óData bits: 8

óStop bits: 1

óFlow Control: None