Planet Technology WL-8315 3.2.1.3 802.1x Setting-Certification, AES, 64-bit, 128-bit, An example for MD5 Authentication

	AES – AES has been developed to ensure the highest degree of
	security and authenticity for digital information and it is the most
	advanced solution defined by IEEE 802.11i for the security in the
	wireless network.
	Note: All devices in the network should use the same encryption
	method to ensure the communication.
WPA Pre-Shared Key	The WPA-PSK key can be from 8 to 64 characters and can be
	letters or numbers. This same key must be used on all of the
	wireless stations in the network.
WEP Key	The WEP keys are used to encrypt data transmitted in the
(Key1 ~ Key4)	wireless network. There are two types of key length: 64-bit and
	128-bit. Select the default encryption key from Key 1 to Key 4 by
	selected the radio button.
	Fill the text box by following the rules below.
	64-bit– Input 10-digit Hex values (in the “A-F”, “a-f” and “0-9”
	range) or 5-digit ASCII characters (including “a-z” and “0-9”) as
	the encryption keys. For example: “0123456aef“ or “test1”.
	128-bit– Input 26-digit Hex values (in the “A-F”, “a-f” and “0-9”
	range) or 13-digit ASCII characters (including “a-z” and “0-9”) as
	the encryption keys. For example:
	“01234567890123456789abcdef“ or “administrator”.

3.2.1.3 802.1x Setting-Certification

The IEEE 802.1X specification describes a protocol that can be used for authenticating both clients and servers on a network. The authentication algorithms and methods are those provided by the Extensible Authentication Protocol (EAP), a method of authentication that has been in use for a number of years on networks that provide Point-to-Point Protocol (PPP) support as many internet service providers and enterprises do.

When an AP acting as an authenticator detects a wireless station on the LAN, it sends an EAP-Request for the user's identity to the device. (EAP, or the Extensible Authentication Protocol, is an authentication protocol that runs before network layer protocols transmit data over the link.) In turn, the device responds with its identity, and the AP relays this identity to an authentication server, which is typically an external RADIUS server.