uConnect Station List: Display all the MAC addresses of the wireless stations associating with the AP.
uCurrent Network Setting: Displays the information about the current wireless network, including Channel, SSID, WEP and Tx Power Level.
uMore Setting: Press this button for further settings including disable/enable WEP, MAC address Filter and Bridge Adapter, etc. Please refer to the Section 3.7 for detailed descriptions of each item.
uTx and Rx Frame: Shows the number of valid transmitted/received data frames of the AP.
3.7Access Point Setting
You can enter this screen by clicking the “More Setting…” button. Here you can configure the AP connection settings such as Channel, Basic Rate, SSID, Tx Power, WEP, Authentication Mode and other advanced functions.
uGeneral Connection Setting: Displays the connection information of the AP, including Channel, Basic Rate, SSID and Tx Power. You can click the “Change” button to modify these values.
ØChannel: Selects the number of the radio channel used by the AP.
ØBasic Rate: Selects the basic data transmission rate supported by the AP. There are four options, including “1, 2Mbps (Mixed mode)”, “1, 2, 5.5, 11Mbps (Mixed),” 1, 2, 5.5, 11, 6, 12, 24Mbps (802.11g), and “6, 12, 24Mbps (802.11g only).” If the AP
20