Figure 4-22

 

 

Parameter

Description

Power Save Mode

The power saving function is only available when the network type is

 

in infrastructure.

 

Continuous Access – The device will always set in active mode.

 

Max Power Save – Enable the device in the power saving mode

 

when it is idle.

Preamble

The preamble defines the length of the CRC block of communication

 

among wireless devices. This option is only active in the Ad-Hoc

 

network.

Transmit Power

If you want to lower the transmit power of the device for saving the

 

power of the system, you can select the lower percentages from the

 

list. The lower power will cause the lower signal strength and the

 

coverage range.

 

There are four modes including Auto, High, Medium and Low.

Transmit Rate

There are several options including

 

Auto/1/2/5.5/6/9/12/18/24/36/48/54Mbps for you to select. When the

 

“Auto” is selected, the device will choose the most suitable

 

transmission rate automatically. The higher data rate you designated

 

in the network, the shorter distance is allowed between the device

 

and wireless stations.

 

29