Parameter | Description |
|
|
Available Networks | This list shows all available wireless networks within range of your |
| card. It also displays the information of the networks including the |
| SSID, BSSID, Signal Strength, Channel, Encryption, |
| Authentication and Network Type. If you want to connect to any |
| networks on the list, |
| will automatically connect to the selected network. |
Rescan Button | Click “Rescan” button to collect the new information of all the |
| wireless networks nearby. |
Connect Button | Click “Connect” to connect to the selected network. |
Add to Profile Button | Add the selected network to Profiles list. |
1.If the access point you selected does not enable encryption (The content of ‘Encryption’ field of the access point you selected is ‘None’, you’ll be connected to this wireless access point within one minute.
2.If the access point you selected enables encryption, please proceed to next step.
3.If the wireless access point does not have SSID, you’ll be prompted to input it here. Please ask the administrator of this AP and input the exact SSID here, then click ‘OK’ when ready. If the SSID you provided here is wrong, you’ll not be able to connect to this access point.
If the wireless access point you selected have SSID, please skip this step.
4.If the AP uses encryption, you have to input WEP passphrase or WPA preshared key. Please ask the administrator, and input the correct passphrase / preshared key here, then click ‘OK’. If the value you inputted here is wrong, you will not be able to connect to this wireless