Planet Technology WNL-9500 3-6WPS Configuration

Setting...	Click this button to select the WMM data type which will suppress
	the function of power saving. When this kind of data is
	transferring, power saving function will be disabled. Available data
	types are AC_BK (Background / Low Priority), AC_BE (Best
	Effort), AC_VI (Video First), and AC_VO (Voice First).
Direct Link Setup Enable	Enable or disable direct link setup (DLS) function. This function
	will greatly improve the data transfer rate between WMM-enabled
	wireless devices. Please click ‘Apply’ button on the right of this
	check box after you check or uncheck this box, so corresponding
	settings in this window will be activated or deactivated
	respectively.
MAC Address	Input the MAC address of another WMM-enabled wireless device
	you wish to establish a direct link here, then click ‘Apply’ to add
	this MAC address to DLS address table.
Timeout Value	Input the timeout value of this WMM-enabled direct link wireless
	device. If the wireless device is not responding after this time, it
	will be removed from DLS table.
Tear Down	If you want to remove a specific wireless device from DLS table,
	select the device and click this button to remove it.

Note: This function does not support in Windows VISTA.

3-6 WPS Configuration

Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network setup become very simple. If you have WPS-enabled wireless access point, and you want to establish a secure connection to it, you don’t have to configure the wireless access point and setup data encryption. All you have to do is go to the WPS setup page of this wireless card, click a button, and then press a specific button on the wireless access point you wish to establish a secure connection - just three simple steps!

The WNL-9500 is compatible with WPS. To use this function, the wireless access point you wish to connect to must support WPS function too. Now, please follow the following instructions to establish secure connection between WPS-enabled wireless access point and your wireless network card:

Click ‘WPS Configuration’ tab, and the following settings will appear: