Planet Technology WNRT-630 Hardware Installation

Hardware Installation

1.Locate an optimum location for the WNRT-630. The best place for your WNRT-630 is usually at the center of your wireless network, with line of sight to all of your mobile stations.

2.Adjust the antennas of WNRT-630. Try to adjust them to a posi- tion that can best cover your wireless network. The antenna’s posi- tion will enhance the receiving sensitivity.

3.Connect RJ-45 cable to WNRT-630 LAN port. Connect one of the LAN ports on WNRT-630 to your LAN switch/hub or a computer with a RJ-45 cable.

4.Connect RJ-45 cable to WNRT-630 WAN port. Connect the supplied Ethernet cable to xDSL/Cable Modem and the WAN port on WNRT-630.

5.Plug in power adapter and connect to power source. After power on, WNRT-630 will start to operate.

	ONLY use the 12V 1A power adapter supplied with the
	WNRT-630. Otherwise, the product may be damaged.
	If you want to reset WNRT-630 to default settings, press
Note	and hold the RESET button over 20 seconds and release.
	And then wait for WNRT-630 restart.