Planet Technology XRT-401B manual Connect WAN Cable, Power Up, Check the LEDs

Broadband Router User Guide

3. Connect WAN Cable

Connect the DSL or Cable modem to the WAN port on XRT-401B. Use the cable supplied with your DSL/Cable modem. If no cable was supplied, use a standard cable.

4. Power Up

•Power on the Cable or DSL modem.

•Connect the supplied power adapter to XRT-401B and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

5. Check the LEDs

•The LAN LED should flash in Orange, then turn Off. If it stays Orange, there is a hardware error.

•For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is also ON.)

•The WAN LED should be ON.

8