TIPS
Pair/Connect Just Once
Pairing is a
Watch for Flashing Red LED
This headset will visually warn you when your battery is low and needs to be recharged.
Continue a Call Without the Headset If you need to continue a call without using your headset, just press the Call button for 1 second and the call trans- fers back to your phone. You will hear a tone to confirm the transfer.
Stay Near Your Phone:
Bluetooth has a working “range” of up to 33 feet between the phone and headset before audio degrades and the connection is lost.
Know How to Reconnect:
Your headset tries to reconnect a lost connection. If it can’t, then tap the Call button once or manually reconnect via the phone’s Bluetooth device menu.
Reset if You Cannot Reconnect
If your headset was working but now won’t connect, remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often.
Simply turn your phone off and re- move the battery for a few seconds, then replace the battery and turn it back on again. If this does not resolve the issue, delete the pairing informa- tion for your M100 headset and pair it with your phone again.
Sound Your Best:
For best voice pickup, always check that the headset points towards the corner of your mouth.
