| Headset Controls |
|
|
Turn on the headset | Press and hold the call control button until the |
| indicator glows blue. You will hear ascending |
| tones. The indicator then flashes red up to three |
| times to show the battery charge level. |
|
|
Turn off the headset | Press and hold the call control button until the |
| indicator glows red. You will hear descending |
| tones. When power is off, indicator stays off. |
|
|
Answer a call | Briefly press the call control button. |
| When you receive a call, your phone may ring |
| before your headset rings. Wait until you hear |
| the ring in your headset before you press the call |
| control button to answer the call. |
|
|
Reject a call | Press the call control button for 2 seconds. |
|
|
End a call or cancel | Briefly press the call control button. |
an outgoing call |
|
|
|
Make a call | Enter number on your phone, press send, and |
| the call is automatically transferred to headset; no |
| need to press call control button. |
|
|
Adjust the volume | Briefly push up or down on the volume button for |
| incremental volume steps. You will hear two tones |
| (high tone followed by low tone) at the volume limit. |
| WARNING: Do not use headphones/headsets |
| at high volumes for an extended period of time. |
| Doing so can cause hearing loss. Always listen |
| at moderate levels. See www.plantronics.com/ |
| healthandsafety for more information on headsets |
| and hearing. |
|
|
7
