Plantronics 510-USB manual Using Your Headset, Multipoint Versatility

USING YOUR HEADSET

Answering/Ending/Making Calls with PerSono Suite on Softphone

To make a call, simply dial the number via your softphone application. To answer or end a call, press the call control button

When using PerSono Suite, the radio link between the headset and the USB Bluetooth adapter will only be active during a call. This is the default setting intended to preserve the battery life of the headset. However, you may wish to have the radio link active when not on a call so you can listen to other audio sources, such as streaming audio on your PC.

Multipoint Versatility

The Voyager 510-USB headset has Multipoint Technology which allows you to seamlessly switch between two audio devices. You can answer a call from either your PC-based softphone or your mobile phone by pressing the call control button. The headset must be paired to both devices.

Additional Features

Only with Mobile Phone

NOTE: Locking the radio link on for extended periods of time will significantly reduce the standby and talk time of the headset.

For Softphones Not Compatible with PerSono Suite

Check the PerSono Suite compatibility list at www.plantronics.com/SoftphoneCompatibility for the most current information on softphone compatibility.

If your softphone is not currently supported by PerSono Suite, remote detection and answer/end via the headset does not function. Pressing the call control button on the headset will only open and close the radio link providing audio; you must answer the call from the softphone.

Answering/Ending/Making Calls with Mobile Phone

To answer or end a call, briefly press the call control button.

To make a call, enter number on your phone, press send, and the call is automatically transferred to headset; no need to press the call control button.

Redialing Last Number

To activate last number redial, double click the call control button. You will hear a high tone for each key press. When you hear a further tone, the last number has been redialed.

Rejecting a Call

When receiving an incoming call, press and hold the call control button. You will hear a tone. When you hear a second tone, the call has been rejected and you can release the button.

Using Voice Dialing

With the headset on, press and hold the call control button for 2 seconds, until you hear a second tone, to activate voice dialing.

NOTE: To use voice activated dialing, the voice dialing feature must be enabled on your phone. See your Bluetooth phone manual for instructions.

Switching a Call From Phone to Headset

To switch an active call from your phone to your headset, briefly press the call control button.

Switching a Call From Headset to Phone

To switch an active call from your headset to your phone, press and hold the call control button until you hear a tone. When you hear a second tone, the transfer has been completed and you can release the button.

12 0 0 13