1
2
To make a call:
1.Take your handset
2.Press the call control button on the headset. The talk indicator lights on both the base and the headset should go on, indicating a successful link. Dial tone should sound through headset. Dial using the telephone keypad.
To answer a call:
1.Take the handset
2.Press the call control button on the headset to answer a call.
To end a call, press the call control button on the headset, then hang up the handset.
NOTE: If either you or the recipient have trouble hearing, please check compatibility (page 14).
12
2
1
To first test proper set up of the handset lifter:
1.Press the call control button on headset to activate handset lifter and lift handset from phone. Dial tone should sound if the handset is raised high enough.
2.If no dial tone, adjust handset lifter height switch or reposition lifter under handset. If you still do not hear a dial tone, you may need to insert extender arm (see page 22) or check compatibility (page 14).
Use mounting tape to secure handset lifter in position.
2
1
To make/answer a call:
1.Press the call control button to raise the handset lifter.
2.Use the telephone keypad to dial the number.
To end a call:
Press the call control button to lower the handset lifter. (Phone will hang up).
NOTE: If either you or the recipient have trouble hearing, please check compatibility (page 14).
13
