Muting the Headset
You can mute/unmute the headset the following ways:
Headset | Base | PerSono Suite |
|
| Software* |
Conferencing In Up to Three Additional Headsets
While on a call you can subscribe up to three additional headsets to your base for conferencing. As you add headsets to the base an additional headset icon will appear in the PerSono Suite software screen with a number from 1 to 3 indicating the number
Press the volume down button (at least 1½ seconds) until the base talk button indicator light for the active call becomes solid red.
Short press (less than | Click the green |
one second) of a red | headset icon. |
desk phone or PC talk | The headset |
button on the base will | icon will turn red |
unmute the headset. | indicating the |
You cannot mute the | headset transmit |
headset using the | is muted. Clicking |
desk phone or PC talk | the headset icon |
buttons. | again will unmute |
| the headset. |
of additional headset subscribed to the base.
Guests may conference in as described below:
1While you are on a call:
a)Place the guest’s headset into primary user’s charge cradle.
OR
b) Place the guest’s headset into |
subscription mode by pushing the headset volume |
*Desk phone and PC audio links have to be brought up by the headset or base. You cannot initiate an audio link via the Audio
Control Screen in the PerSono Suite software.
Subscribing a Master Headset
The headset and base are subscribed to each other at the factory. In the event that you need to subscribe a new master headset
to the base you can do so one of two ways. You can subscribe a master headset to the base with the headset docked (secure subscription) or undocked
Headset Docked | Headset Undocked |
up button for three seconds until the indicator light |
becomes solid green. |
2 | Short press (less than one second) the subscription |
| button on the base. |
| The subscription light will flash yellow and green. |
3 | The subscription light will then turn solid yellow and you |
| will hear a tone in the master headset indicating a guest |
| wishes to join the call. |
4 | If you press the call control button on the master |
| headset within five seconds, the guest is joined to the |
| call. |
| If you do not press the call control button within five seconds, |
| the request to join the call is rejected and the guest will hear an |
Double press the subscription button on the base. The subscription light will flash red and green.
When the subscription light becomes solid green, the headset and based are subscribed to one another.
Double press the subscription button on the base. The subscription light will flash red and green. Press the volume up button on the headset for three seconds until the headset indicator light turns solid green.
When the subscription light on the base becomes solid green, the headset and base are subscribed to one another.
error tone in their headset. |
5 Guests may leave the conference call by pressing their |
call control button. |
When they do you will hear a single tone in the master headset as each guest leaves the call.
To see how many headsets are subscribed to the base, refer to the lower left corner of the PerSono Suite software screen. The first headset is the master headset and the number inside the next headset is the number of guest headsets subscribed to the base. The examples below show 1, then 2, then 3, guest headsets
Note If the subscription process times out after two minutes or if the subscription process fails, the subscription light will become solid red for four seconds and then return to its previous state. If this occurs, try to
subscribed to the base in addition to the master headset.
123
Plantronics Savi User Guide | 15 |