Naturally it is also important to make sure all the leads carrying signals for the RIGHT channel loudspeaker are connected to the RIGHT input to the amplifier from your preamplifier or CD player etc. Signals for the LEFT channel should be wired in a similar fashion.
CONNECTING THE MAINS SUPPLY
Now that your Plinius P8 Power Amplifier is configured correctly, the mains cable can be plugged into the IEC socket on the back of the amplifier. Turn on the power switch on the rear panel. The power LED will pulse for ten seconds as the internal microprocessor allows the internal circuitry to stabilise. You can now enjoy your new Plinius P8 Power Amplifier.
WARM-UP PERIOD
You will find that the Plinius P8 will become noticeably ‘purer’ in sound after being on for a period of time. We usually recommend waiting at least 24 hours before expecting the best quality of sound reproduction from your amplifier. Also, as the Plinius P8 uses very little power while on, we suggest leaving the unit turned on so that it will always be at it’s sonic best.
11
