E – 47
3
Install the new lamp cartridge.
qInstall the new lamp cartridge in the direction as shown
in the drawing.
Plug
4
Reinstall the lamp cover.
qInsert the lamp cover until the catches fit in the grooves.
wTighten the lamp cover screw.
wTighten the lamp cartridge screw.
(Put down the handle of the lamp cartridge.)
Groove
5
Reset the lamp usage hours to zero.
From the menu, select [Info.] → [Lamp Timer Reset] and then reset the lamp usage hours.
See "Resetting the Lamp Timer" on page E-43.
NOTE: When the projector lamp has exceeded 1100 hours of operation, the projector will not turn on. This means you cannot reset the lamp usage on the
menu. Should this happen, press SOURCE and ASPECT on the projector cabinet for at least of 5 seconds at the same time when the projector is in standby
mode. When the lamp usage is reset, the STATUS indicator goes off.
[This completes the lamp replacement.]
Replacing the Lamp Cartridge