Remote Control Features

You can use your remote control wireless to operate your
UP-800 Data Projector. With the remote mouse receiver
connected to your computer, you can also use the projector's
remote control to operate your computer's mouse wireless,
too. (See page E-20 to connect the remote mouse receiver to
your computer.)
NOTE: If you are using a Macintosh computer, you can click either
the right or left button to activate the mouse.
1Left Click Button
Use this button to enter your menu selection. It works the
same as the "Enter" button on the cabinet.
2Infrared Transmitter
Direct the remote control toward the remote sensor on the
projector cabinet or the remote mouse receiver.
3LED
Flashes when any button is pressed.
4Power On And Off
If your main power switch is turned on, you can use this
button to turn your UP-800 Data Projector on and off.
5Video Button
Press to select an NTSC, PAL, SECAM or NTSC4.43
compatible video source from a VCR, laser disc player or
document camera.
6S-Video Button
Press to select an S-Video source from a VCR.
7RGB Button
Press to select a video source from a computer connected
to your RGB port.
8Volume Buttons
Adjusts the volume for the projector main unit speakers.
3
4
5
7
8
1
2
6
OFF ON
VIDEO
PIC-MUTE
IR IR
FREEZE
R-CLICK
MENU
S-VIDEO
POWER
VOLUME
RGB
MAGNIFY
REDUCE
POSITION
PLUS
E – 11