Pair a New Stride Sensor with Your Receiving Device
Polar Stride Sensor Bluetooth® Smart must be paired with the receiving device in order to analyze your running technique and efficiency. For more information, see the user guidance material of the receiving device or mobile application.
Attach the Stride Sensor on Shoelaces
1.Undo your shoelaces and place the holder on top of the tongue of the shoe. Make sure the holder flap is facing upwards.
2.Thread the laces in through the holes on the sides of the holder and out through the hole on the bottom of the holder (pictures C1 and C2). Thread the laces through the small flap on the tongue of the shoe to ensure the holder does not move while running.
3.Tighten the laces.
4.Fit the front part of the sensor into the holder and press from the rear (picture C3). Fasten the flap.
5.Make sure the sensor does not move and is aligned with your foot. The more secure the sensor, the more accurately speed and distance is measured.
