3-2
Preparing the camera
To prepare the camera to take passport or ID photos:
1Plug the AC power cord into the back of the camera and
into a wall outlet. The camera will power up.
Both the green Ready light and the green Exposure light
will illuminate. See the example in Chapter 4, LED
display functions.
Note: If the camera is unused for approximately ten
minutes, it will automatically shut off to conserve power.
Press the On button to reactivate the camera.
2If necessary, load film into the camera. Refer to Chapter
2, Loading film, for detailed instructions.
3Place your subject in a chair against the backdrop. For
best results, position the subject as close to the backdrop
as possible. Remember, passport photos require a white
background. For questions regarding passport specifica-
tions and techniques, call toll-free: 1-800-343-5000.
Note: For passport photos, move the aiming light selector
to “PP”; for ID photos, set the selector to “ID”. Refer to the
section The camera, in Chapter 1, for the location of the
aiming light selector.