Polaroid 402b manual Removing and Attaching the Film Back, Taking Pictures

English

Removing and Attaching the Film Back

To remove:

Rotate the thumbwheels (A) clockwise to remove the film back.

To attach:

1. Align the left edge of the film back under the two tabs on the camera.

2.Rotate the thumbwheels counterclockwise to

secure the back.

Taking Pictures

1.Mount the camera on a tripod.

2.Attach the electronic flash to the mount on top of the camera. If using a separate flash, attach its cable

to the X-sync flash socket on the front of the camera. Note: We recommend the use of Polaroid Flash MP485 (part number 616593). Contact your dealer for more information.

3. Attach a film back to the back of the camera and remove the dark slide.

Note: For additional camera backs, order the Pro Accessory Back (part number 624066). Contact your dealer for more information

4.Position the camera 1.2 m (4 feet) from the subject.

5.Frame the subject in the viewfinder.

6.As a starting point, set the lens aperture

control to 16. If the picture is too light or too dark, see the section Adjusting Exposure.

7.Lift the shutter-cocking lever up.

8. Press the shutter release to take the picture.

3