- 12 -
Remote Control
6.
Press to select menu items or settings. Press buttons to adjust value in the
picture setup menu. Press buttons to select channels forward and backward
in TV mode. Or press to adjust the value of time when setting time on the display
panel. Press to enter the selection. Press to exit the selection.
7. ENT button
Press to confirm selections.
8. MENU button
Press to access the menu of current mode.
9. CH +/-
Press to select channels in TV mode.
10. MUTE button
Press to mute off the speakers output.
11. 0-9 number buttons
Select numbers by pressing these buttons.
One-digit number: press the number button and press the ENT button or wait 2
seconds to confirm.
Two-digit number: press the first number and input the second number in 2
seconds.
Three-digit number: press the first number, then input the second number in 2
seconds, and input the third number in the next 2 seconds.
12. CH DISP
In TV mode, display the current channel information.
13. P-MODE button
Press to change the picture modes: Bright, Soft or Nature.
14. LAST button
Press to back the last channel that you watch in TV mode.
15. 16:9/4:3 button
Press to change the screen aspect ratio between 16:9 and 4:3.
16. VOL-/+ button
Press to adjust the volume.
Note: When the portable DVD player is connected to the docking station, the mute
button on the docking station remote control mutes the docking station only. If you
want to turn off the volume of the portable DVD player, adjust the volume control on
the portable DVD player to its minimum volume level.