Polaroid CSGS20BC2, CSGX36BC3 ［Machine externals specification］, ［Operating Ambient conditions］

［Machine externals specification]］

(1)	Dimensions	44mm(W) x 29mm(H) x 70mm(D) (Not including protrusion)
(2)	Mass	Approximately 120g
(3)	Lens mount	C-mount

Notes on combination of C-mount lens:

-Depending on the lens you use, the performance of the camera may not be brought out fully due to the deterioration in resolution and brightness in the peripheral area, occurrence of a ghost, aberration and others. When you check the combination between the lens and camera, be sure to use the lens you actually use. As for the C-mount lens used combining this camera, the projection distance from bottom of the screw should use 9.4mm or less.

	Bottom of
C-mount lens	the screw

	9.4mm or less
(4) Flange back	it is not possible to adjust it.

(5) Camera body grounding: insulation status

Conductive between circuit GND and camera body

［Operating Ambient conditions］

(1) Ambient conditions
- Performance assurance
Temperature	0 to 40° C
Humidity	10 to 90% (no condensation)
- Operating assurance
Temperature	-5 to 45° C
Humidity	90% or less (no condensation)
- Storage assurance
Temperature	-20 to 60° C
Humidity	90% or less (no condensation)
(2) EMC conditions
- EMI (Electro-Magnetic interference)	EN61000-6-4 conformity
	FCC part15 Subpart B class A conformity
- EMS (Electro-Magnetic susceptibility)	EN61000-6-2 conformity

Notes on Conformity of the EMC:

-About the conformity of the EMC standard of this machine, it has guaranteed in the conditions combined with the option part of 4th clause.

When used combining parts other than specification of our company, I ask you to have final EMC conformity checked of a visitor with a machine and the whole equipment.

13 D4153659A