Advanced Operations:
USB Connection to a Digital Camera
Using a USB cable (not included) and the USB port on the side of your Digital Photo Picture Frame, you have the ability to play stored images from the memory card or flash memory of your digital camera. This is especially helpful when using a digital camera that only uses flash memory.
1.Connect the AC adapter to the Digital Photo Picture Frame and slide the Power Switch on.
2.Once the Digital Photo Picture Frame has recognized your digital camera, you will be able to view all of the pictures on the memory card in the camera. If the camera doesn’t have a memory card installed or doesn’t use a memory card, you will view the camera’s internal flash memory.
Changing Picture Frames
Additional frames may not be included. Changing picture frames is easy as
1.Locate the latch on the side of the back cover. Press it gently to release the back cover from the frame.
2.Lift the back cover and gently pull it from the two holding slots on the other side of the frame.
3.To reattach a new frame, simply hold the back cover at a slight angle, then insert the two wedges on the other side of the back cover into the matching holding slots of the frame. Gently lower the back cover while pressing
on the latch until it clicks onto the frame.
