ENGLISH
USING THE FEATURES
Basic Operation
Turning the TV On and Off
1After connecting a CATV or antenna to your LCD TV, and turn the POWER SWITCH of rear TV on, an amber LED light indicates when the LCD TV is activated.
2Press the POWER button, the LED green light indicates on.
3Press the POWER button, the LED amber light indicates off.
Select Source
Press the SOURCE button to display the selection signal on the screen.
Select TV Channel
1Press the CH+/- button on the remote control and the CHANNEL ▲/▼ button on the LCD TV to select channel.
2 Press the 0~9 buttons then press the ENTER button to input the channel No. and enter into the selection channel No.
3 Press the JUMP button on the remote control to swap the channel between the current channel No. and the previous channel No.
Adjusting the Volume
Press the VOL +/– button on the remote control or the VOLUME +/- button on the LCD TV to adjust the volume.
To Mute the Sound
1 Press MUTE and the sound cuts off.
2 To turn mute off, press the MUTE button again, or simply press the VOL +/- buttons.
Sleep Timer
Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the OFF,15,30,45,60,90 and 120 minutes; when the LCD TV has been reached the set time, it will automatically turn off. If the TV has no input signal, the screen will appeared blue screen and display NO Signal; The TV will automatically change stand by after 15 minutes.
USING THE FEATURES
USING THE FEATURES | 19 |
|
|
|
|
|
|
|
