DVD Module Board Removal and Replacement
(1) DVD Module Board
(2) Power Board
(3) Main Board
(4) Control Button Board
(5) Speakers
Note: Before disassembly of any part the TV, make sure the power is OFF, and the power cord is removed from the wall outlet. Allow time for power within all system boards to discharge before you begin disassembly. Never insert any objects into the vent holes in the TV case.
A
(1)Remove rear cover and baffles as shown in the section, Disassembly Procedure on page 17.
(2)Remove cable from DVD Module Board (A).
(3)Remove 2 screws from the DVD Module Board Cover (B).
(4)Separate the DVD Module Board from the Cover.
B
Note: Before returning this product to the end user, you must follow the steps outlined in the section, Before Returning This Product to the User, on page 16. This procedure ensures that the chassis will not cause electric shock.
23
