System Setup
You can change the default settings of this unit to customize its performance to your own preferences.
Note: Program the system while playback is stopped completely or there is no disc in the payer.
To Set up your system:
1.Press the SETUP button and the setup menu will appear on the screen.
2.Press the direction buttons to select a
the
3. Press the SETUP button again to exit the setup menu at any time during setting.
General Setup
TV DISPLAY
•This item is used to set the TV display mode.
• | Press the | buttons to highlight this item. |
• | Press the | button to access. |
•It includes 4:3 PS, 4:3 LB, and 16:9.
• Press the | buttons to choose the desired language. |
•Press the ENT/ENTER button to confirm your selection.
• Press the | button to exit. |
Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected. Select 16:9 when a 16:9 wide screen TV is connected.
ANGLE MARK
•This item is used to set the angle mark on or off.
• | Press the | buttons to highlight this item. |
• | Press the | button to access. |
• | Press the | buttons to select ON or OFF. |
•Press the ENT/ENTER button to confirm your selection.
• Press the | button to exit. |
OSD LANGUAGE
•This item is used to set the OSD
• | Press the | buttons to highlight this item. |
• | Press the | button to access. |
•There are several languages for you to choose.
• Press the | buttons to choose the desired language. |
•Press the ENT/ENTER button to confirm your selection.
• Press the | button to exit. |
21
