Connecting to a computer
•System requirements:
•Pentium 200 MHz or above
•Microsoft Windows 2000/ME/XP/Vista
•USB port
PC connection:
In order to enjoy the multimedia capabilities of your MP3 Player, you have to rst copy les from your PC to its internal memory.
Connect your MP3 Player to the computer using the included USB 2.0 cable. The device will be detected automatically without installing any driver. Once detected, you can read/write to the device’s memory just as if you were using a regular disk drive.
Make sure your computer is powered on, and follow the steps below to connect the player to your computer.
1.Plug the larger USB connector of the USB cable into the USB port on the computer.
2.Plug the other end (small) of the USB cable to the player.
3.The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to nish the installation.
When it has nished, “MP3” will be created in “My Computer.”
music videos photos record voice
Disconnecting the USB cable:
1.Open the “Safe Device Removal” icon in the task bar, on the lower right corner of the screen.
2.Select “USB Device” and click “Stop”.
3.
device,” disconnect the USB cable from your computer.
Important: to avoid any data loss, always perform a safe USB device extraction before disconnecting the USB cable.
