Polaroid TTM-2004 manual Using the P.LOCK menu, CH Lock

Using the P.LOCK menu

Figure 1

Note:

1.When you enter P.LOCK submenu first time, red “NEW CODE” will display on the menu, input four-digit numbers as your password by pressing 0-9 buttons. After you input the numbers, blue “ENTER CODE” will display on the menu, input again the password you have set to enter P.LOCK submenu, the submenu will display as the following:

Figure 2

2.If you have set your password, when you want to enter P.LOCK submenu, the menu will display blue “ENTER CODE” shown as figure 1, input your password to enter the submenu shown as figure 2.

3.If you need to modify your password, first enter the submenu shown as figure 1, then press CODE button on the remote control, the “OLD CODE” will display in red on the menu; Input your old password, then “NEW CODE” will display in red on the menu, input four-digit numbers as your new password. “ENTER CODE” will display in blue on the menu, input your new password to enter the submenu shown as figure 2. If you forget your password, input 4769 to enter the submenu and renew your password.

CH LOCK

Select this item to enter CH LOCK submenu (as shown). You can set to lock one channel in this submenu.

LOCK ON:	Turn on CH LOCK.
OFF:	Turn off CH LOCK.
CH AIR:	Select the channel you want

to lock, you can use VOL button

or number buttons to input channel number.

Note: “CH CABLE ***” will be displayed under CABLE mode.

CH LOCK ON: The selected channel in the CH LOCK menu cannot be viewed.

OFF: LOCK is deactivated and any selected channel for CH LOCK, can be viewed.

11