ENGLISH

IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

10.WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

Product Disposal—Certain interna- tional, national and/or local laws and/

or regulations may apply regarding the disposal of this product. For further

detailed information, please contact the retailer where you purchased this product or the Polk Audio Importer/

Distributor in your country. A listing of Polk Audio Importer/Distributors can be found on the Polk Audio website www.polkaudio.com or by contacting

Polk Audio at 5601 Metro Drive, Baltimore, Maryland 21215, USA—Phone: +1 410 358-3600.

WARNING: Listen Carefully

Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products.

Keep these guidelines in mind and always use your own good judgment when controlling volume:

You should limit prolonged exposure to volumes that exceed 85 decibels(dB).

For more about safe volume levels, go to the Occupational Health and Safety Administration (OSHA) guidelines at http://www.osha.gov/dts/ osta/otm/noise/standards_more.html

Take Inventory

Inside each speaker container, you should find the following:

1.One in-wall loudspeaker or one set of loudspeakers for F/X® models only.

2.Speaker cutout mounting template

3.One Sheer-Grille (for each speaker)

3.Port plug (265-ls, 65f/x-ls, 65-ls, 265-rt, 65f/x-rt& 65-rtonly)

4.One Owner’s Manual

5.Registration Card

Important Note: If anything is missing or damaged, or if your speaker fails to operate, notify Polk Audio Customer Support Services immediately at 800-377-7655.

Installation Recommendation For Optimum Performance

Important Note: Vanishing Series Loudspeakers are not magnetically shielded and should not be placed closer than 1’ (30cm) from a CRT (tube) television or video monitor.

Important Note: You should have a thorough understanding of and adhere to all local building and fire codes. Also, you should be familiar with the area behind the wall or ceiling into which you plan to install your speakers. Always use wire that meets appropriate building and fire codes. (Note: Wiring is best performed

by an experienced professional.)

When installing your loudspeakers, be aware of the weight of your particular model and the sturdi- ness of the material into which you are installing the speaker. Be aware of any concealed studs, electrical wiring or plumbing in the wall or ceiling into which you are installing the speakers.

If you doubt that you possess the necessary skills or tools, consult your Polk Audio dealer or a professional installer.

Wire Recommendations (minimum recommended)

Runs

Gauge

Lengths up to 25'

18 or 16

Lengths greater than 25'

16 or 14

but less than 50'

 

Lengths greater than 50'

14 or 12

but less than 75'

 

Lengths greater than 75'

12

Loudspeaker Installation

You will need:

Pencil for marking the location of installation.

Keyhole saw, utility knife or material- appropriate tool for cutting drywall or other wall material.

Level.

Screwdriver, preferably powered, with Phillips Head bit.

Power drill with appropriate bit

(optional, for starting wall cut).

Trace around the template.

Cut the hole with the appropriate tool.

Important information Before you Install your LoudSpeakers

Wall Or Ceiling Surface Preparation

If you’re installing your Vanishing Series speaker into a heavily textured wall or ceiling (e.g. stucco or popcorn finish), you must prepare the wall surface immediately around the speaker cutout. Sanding and smoothing the wall or ceiling surface will ensure the speaker and grille both seat properly and flat to the surface.

2

Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com

Page 2
Image 2
Polk Audio 625-RT, 265-LS, 265-RT Take Inventory, Installation Recommendation For Optimum Performance, Runs Gauge

255C-LS, 265-RT, 65F/X, 265-LS, 255C-RT specifications

Polk Audio has long been a trusted name in high-quality audio equipment, and its latest lineup exemplifies this legacy of excellence. The Polk Audio 255C-RT, 65-LS, 625-RT, 65-RT, and 65f/x-LS speakers showcase advanced technology and a commitment to delivering exceptional sound performance in a variety of listening environments.

The Polk Audio 255C-RT is a versatile center channel speaker that plays a crucial role in creating a balanced home theater experience. It features a dynamic balance driver array that includes three 5.25-inch drivers and a 1-inch silk dome tweeter, providing crystal-clear dialogue and immersive sound effects. Its slim profile allows it to fit seamlessly into any entertainment setup, while its precision-engineered construction minimizes distortion for a more natural audio experience.

Moving on to the 65-LS model, this in-wall speaker is designed to blend into any room while delivering powerful sound. Featuring Polk's proprietary Dynamic Balance technology, the 65-LS utilizes a unique driver design that enhances sound clarity and reduces resonance. The speaker is also equipped with a 6.5-inch mineral-filled polypropylene cone woofer and a 1-inch silk dome tweeter, ensuring a wide frequency response for both music and movie playback.

The 625-RT is another remarkable in-wall solution, featuring a 6.5-inch woofer and a 1-inch tweeter. Its dual voice coil design allows for bi-wiring capability, improving overall sound transparency. The low-profile design ensures that the speaker remains discreet, making it an ideal choice for those who prefer a clean aesthetic without sacrificing audio quality.

For those looking for a versatile in-ceiling option, the 65-RT provides an excellent solution. With its swivel tweeter, users can direct sound where it's needed most, creating an enveloping listening experience. It's equipped with a robust 6.5-inch driver, offering rich low-end response while still maintaining clarity in the midrange and highs.

Finally, the 65f/x-LS is a unique speaker designed for surround sound applications. Its dual drivers and flexibility in mounting position allow it to adapt to various environments, enhancing the immersive quality of any home theater. This speaker's seamless integration with other Polk Audio models creates a cohesive soundstage, making it a perfect addition to any audio setup.

Together, these Polk Audio models represent a blend of innovation, style, and sound quality that cater to both audiophiles and casual listeners alike. With their advanced features and technologies, they promise a listening experience that is both rich and fulfilling, making Polk Audio a go-to brand for home audio solutions.