1FIGURE OR
FIGURE 1
Most popular placement, above the TV screen. CSM Series Center Speakers are magnetically shielded for safe placement near TV or video monitors. If you notice video distortion or discoloration, immediately move the speakers away from the video source and call Polk Audio Customer Service 800.377.7655 (US and Canada) or polkcs@polkaudio.com.
La ubicación más común es encima de la pantalla del televisor. Los altavoces centrales de la serie CSM tienen blindaje magnético para poder ubicarlos con seguridad cerca de monitores de televisión o de video. Si nota que hay distorsión o descoloración de la imagen, aleje inmediatamente los altavoces de la fuente de video y comuníquese con el servicio al cliente de Polk Audio.
Disposition la plus courante,
Si vous percevez de la distorsion ou de la décoloration vidéo, éloignez immédiatement les enceintes de l’écran et communiquez avec le service à la clientèle de Polk.
Häufigste Platzierung – über dem Fernsehbildschirm.
FIGURE 2
FIGURE 2
Basic Center Channel Speaker hookup diagram. Set Center Channel to “small” in your receiver’s Bass Management settings.
Diagrama básico de conexión.
Diagramme de branchement rudimentaire.
Grundlegendes Anschlussdiagramm.
3FIGURE
FIGURE 3
Using binding post connections.
Uso de conexiones con tornillos de presión.
Utilisation des bornes de branchement.
Verwendung von Anschlussklemmen.
Loosen hex nut
Desenrosque parcialmente la tuerca hexagonal
Desserrer l’écrou Sechskantmutter lösen
Insert speaker wire through hole
Inserte el alambre para la bocina en el orificio
Insérer le fil du
Tighten hex nut
Enrosque la tuerca de nuevo
Serrer l’écrou
Sechskantmutter festschrauben
Do not insert insulated section of speaker wire
No inserte alambre con material aislante
Ne pas insérer la partie isolée du fil du
Isolation des Lautsprecher- Drahtes nicht in das Loch schieben
To use Banana Plugs (US only):
Unscrew the binding post lug nuts completely
to expose the binding post plugs
(plastic plugs inserted into the binding posts).
Carefully pry out the binding post plugs
to expose banana plug holes.
Screw the lug nuts back on the binding posts
and insert banana plugs. (This is for US owners only.)
FOR MANUAL UPDATES, VISIT
http://www.polkaudio.com/home/products/center/csm
FOR MORE DETAILED HOOK UP AND PLACEMENT INFORMATION, VISIT http://www.polkaudio.com/home/faqad/
FOR RECOMMENDED ACCESSORIES (INCLUDING SPEAKER STANDS, BRACKETS AND EXCLUSIVE POLK AUDIO LOGOWEAR), VISIT OUR WEBSTORE: http://shop.polkaudio.com/
for more information visit our website at www. polkaudio . com