Polk Audio CSW Series manual Polk technolgy, Size or unobtrusiveness, Dynamic Balance

4CSW SERIES LOUDSPEAKERS

CSW200

For ultimate performance, there’s the CSW200, with a direct radiating 10" driver in a 1.5 cubic foot slot load vented MDF enclosure. The CSW200 produces robust bass down to the lowest audible frequencies, thanks to its substantial size and long-throw woofer. With its 12" x 12" grille, the CSW200 is for those who place a premium on performance over

size or unobtrusiveness.

Direct-radiating Laminar Flow Port enclosure is designed for floor and ceiling installations.

Fits engineered floor joists and I-beam construction. 10" Long-throw driver with dual spiders for long excursion control.

Klippel optimized driver.

Designed specifically for floor and ceiling installations. Mounting hardware and isolation pads included.

12" X 12" grille (not included).

5 year warranty.

OVERALL DIMENSIONS:

34 1/8" L X 13" W X 9" D (86.68CM H X 33.02CM W X 22.86CM D) OVERALL FREQUENCY RESPONSE: 22HZ-140HZ

SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.

CSW100

The CSW100 becomes practically invisible in a ceiling or a floor. It can also tuck away in an entertainment cabinet or other furniture. A single 10" woofer plus patented Polk Audio technology—High Velocity Compression Drive® Bandpass Alignment—helps produce a gutsy, driving bass that other similarly sized built-ins can’t equal. Bass frequencies launch out of the enclosure via an unobtrusive 3" x 12" vent. The CSW100 comfortably fits in standard joist spacing.

10" Long-throw driver with dual spiders for long excursion control.

Klippel optimized driver.

Patented High Velocity Compression Drive. bandpass alignment with slot port venting.

Designed specifically for floor and ceiling installations. Fits engineered floor joists and I-beam construction. Mounting hardware and isolation pads included. Sound launches from an unobtrusive 3" x 12" grille.

5 year warranty.

OVERALL DIMENSIONS:

26 1/4" L X 13" W X 9" D (66.68CM H X 33.02CM W X 22.86CM D) OVERALL FREQUENCY RESPONSE: 27HZ-140HZ

SEE SPECIFICATIONS FOR MORE DETAILED PRODUCT INFORMATION.

CSW200 CSW100

polk technolgy

DYNAMIC BALANCE®

Advanced laser imaging technology allowed Polk Audio engineers to see the entire vibrating surface of a driver and tweeter; they could actually see the resonance develop on the speaker cones—resonance that is the root

cause of loudspeaker distortion (A). Being able to see the resonance develop, they determined the “DynamicA Balance” of high-tech materials, geometry and construction that effectively tune out the offending resonance (B).

Exclusive Dynamic Balance Composite Material Technology delivers sound that’s effortlessly clean and clear, even at lifelike volume. See more about Dynamic Balance at www.polkaudio.com/catalog/technology/.

B