Ruckus ZoneFlex 7962 Access Point
Introduction
Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and WLAN infrastructure products.
The products listed below have been thoroughly tested in Polycom’s | |||
lab and have passed VIEW Certification. This document details how | |||
to configure the Ruckus ZoneFlex 7962 Access Point (AP) with | |||
SpectraLink Wireless Telephones. |
| ||
Certified Product Summary |
| ||
|
|
| |
Manufacturer: | Ruckus Wireless: www.ruckuswireless.com | ||
|
|
|
|
Approved models: | ZoneFlex AP 7962 † |
| |
Certified RF technology: | 802.11b |
| |
Radio: | 2.4 GHz |
| |
Security : |
| ||
AP firmware version tested: | 8.0 |
|
|
SpectraLink handset models certified: ** | e340/h340/i640 |
| 8020/8030 |
SpectraLink handset software certified: | 89.135 or greater |
| 122.021 or greater |
SpectraLink radio mode: | 802.11b |
| 802.11b |
Maximum calls tested per AP: | 10 |
| 10 |
Network topology: | Switched Ethernet (recommended) |
| |
†Denotes products directly used in VIEW Certification testing.
**SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified with the WLAN hardware and software identified in the table. Throughout the remainder of this document they will be referred to collectively as “SpectraLink Wireless Telephones”.
Known Limitations
•ZoneFlex AP 7962 is VIEW Certified in 802.11b operating mode only, without a WLAN controller.
•500Kb/s rate limiting must be enabled when phones are deployed in an environment with 802.11b data clients.
•ZoneFlex AP 7962 does support 802.11g protection mode.
PN: | 3 |
