Field Verified | Configuration Guide |
|
|
6.The following table shows additional settings for the
Switch/General configuration. Navigate to this page by clicking the Switch tab at the top of the screen and General in the navigation pane.
Parameter
Enable multicast support
Setting
Enabled
Criticality
Required
7. Click the Apply button to save the changes
8. The following table shows additional settings for the WLAN configuration. Navigate to this page by clicking the WLAN tab at the top of the page and then clicking the Edit button for the WLAN you are using for the SpectraLink Wireless Telephones.
Parameter | Setting | Criticality |
Radio policy | 802.11b only | Recommended |
|
|
|
Admin status | Checked | Required |
Session timeout | 0 (zero) | Required |
Quality of service | Gold | Required |
|
|
|
Blacklist timeout | 60 | Recommended |
DHCP required | As required by installation |
|
DHCP server IP address | As required by installation |
|
|
|
|
VLAN | As required by installation |
|
Layer 2 security | Static WEP | Recommended |
MAC filtering | Not checked | Recommended |
|
|
|
Layer 3 security | None | Required |
Web authentication | Not checked | Required |
WEP key size * | 40 or 104 bits | Recommended |
|
|
|
Key index * | As required for installation | Recommended |
Encryption key * | As required for installation | Recommended |
Key format * | Hex | Recommended |
|
|
|
*These parameters are required if Static WEP is selected for Layer 2 security.
9.Click the Apply button to save the changes.
10.Click the Save Configuration link at the top of the browser window to ensure the configuration is available across system restarts.
The Airespace Wireless Enterprise Platform is now ready for use with
SpectraLink Wireless Telephones. No restart of the system is required.
All parameters take effect when applied.
6 | PN: |
